90T Power Swivel

R-Cat Oilfield Corp provides the newest evolution in Power Swivels. The XK-90 Power Swivel is a hydraulic-powered drilling machine which is capable of well servicing work or light duty drilling. Standard lifting device is an elevator-type bail to fit 27/8” elevators.

Extremely rugged in construction, the XK-90 is inherently balanced to hang vertically. Static load rating is 90 tons, and 100 rpm load rating is 70 tons. The fluid passage through the swivel has a full 2” bore, and a 27/8” IF tool joint connection.

The swivel is rated at 6,000 ft-lb torque at 4200psi hydraulic pressure. Its simple drive does not use gears. Instead, a rugged hollow shaft hydraulic motor drives the main stem directly through a splined hollow shaft. This special motor is designed to provide full swivel torque and maximum swivel speed without any gearing.

Specifications

XK-90 Power Swivel –Skid Unit

Dimensions Imperial Metric
Overall Length 14′ 4.27m
Overall Width 7′ 2.13m
Overall Height 7′ 2.13m
Overall Weight 14,500lbs 6577kg

XK-90 Power Swivel –Trailer Unit

Dimensions Imperial Metric
Overall Length 21′ 6.40m
Overall Width 8′ 2.44m
Overall Height 6.5′ 1.98m
Tongue Weight 1050lbs 476kg
Overall Weight 12,500lbs 5670kg

XK-90 Power Swivel

Max. Circ. Pressure 5000psi/35mpa
Hydraulic Pressure 4300psi
Max Torque @ 5000psi 6000ft-lb
Max Static Load Rating 90 ton
Max Swivel Speed 155 rpm

Miscellaneous

Kelly Cock 2 7/8 IF box x 2 7/8 IF pin
Sub Saver 2 7/8 IF box x 2 7/8 IF pin
Crossover Sub 2 7/8 IF box x 3 ½ EUE pin
Crossover Sub 2 7/8 IF box x 2 7/8 EUE pin
Stem Connection 2 7/8 IF pin
JU pack-off head 6” 600 series x 900 series with rings (2 3/8, 2 7/8, 3 1/2)